// Full length radiolucent top with integral X-ray cassette tunnel
// Capable of 450kg maximum patient weight
// Slimline column centred relative to tabletop and base
// 600mm wide top plus optional width extenders
// Seamless, ‘Velcro-free’ mattresses available in 50mm and 80mm PRS
// Covers are made of impact resistant acrylic capped ABS
// Handset featuring 3" LCD screen for positioning information
// Independent back-up controls incorporated into the column
// Mains powered backup facility
// Battery and charging status indicators on handset and table base
// Auto self-locking head and leg sections
// Powered 250mm traversing top
// Interchangeable head and leg sections
// Tabletop break offset from column
// RS232 port for system analysis
// 600-1000mm height range
// Full 360° mobility
// IR Variants for integrated solutions
// Tabletop width 600mm
// Base width 610mm
// Maximum base width including castors 725mm
// Leg Section -100° +55°
// Trendelenburg 35°
// Reverse Trendelenburg 35°
// Minimum height (excluding mattress) 600mm
// Head Section ± 45°
// Maximum height (excluding mattress) 1000mm
// Maximum Flexion 90°
// Maximum Extension 230°
// Tilt Left/Right 18°
// Maximum Traverse 250mm
// Combined Tilt/Trend 18°/35°
// Break Up/Down 90°/50°
// Full length radio translucent top with built-in x-ray cassette tunnel accessible from either end.
// 600-1000mm height range.
// 450kg maximum patient weight.
// Powered 250mm tabletop traverse.
// 600mm wide tabletop (across sidebars).
// Handset with 3"LCD display and detachable cable.
// Movements provided: Trendelenburg, reverse Trendelenburg, lateral tilt, chair, extension, traverse, simultaneous auto level, height, patient orientation // Table status and battery life indicators.
// Offset tabletop break and centred slimline column for superior imaging and access.
// Column covers in stainless steel.
// Battery powered (mains rechargeable).
// Mains powered backup.
// Head and leg sections are removable and interchangeable, with an auto self-locking mechanism.
// Covers to the top and base are made of scratch resistant and colourful acrylic capped ABS mouldings to minimise potential sites for cross contamination and provide a wash down surface to the tabletop.
// Simple mattress fixings, no velcro.
// Special one-piece mattress covering break position (long and short trunk sections) to combat fluid ingress and to provide superior patient support.
// Supplied with 50mm or 80mm PRS mattresses.
Simply complete your details in the form shown and one of our experienced advisers will contact you as soon as they possibly can to help you with your questions.